Siemens SX1 - Manual (Page 61)

Extras
60
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:16)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_extras.fm
Memory Functions
Manage your memory card and view
relevant details.
Memory card Name
Define a name for the multimedia
card.
Format Memory card
It is necessary to format your multi-
media card before first use.
Set password
Use a password to protect access to a
special multimedia card. After the
password is set, the multimedia card
is locked. Not supported by all multi-
media cards.
Remove password
Remove password protection from
multimedia card.
Unlock Memory card
You must enter the correct password
to unlock the MultiMediaCard.
Memory state
Display details for the multimedia
card and internal phone memory,
e.g. the name, the total capacity,
free and used memory and whether
it is password protected.
General File manager options
New Folder, File, Search, Mark/Unmark,
Send, Sort by/order, Memory Functions,
Exit.
Insert MultiMediaCard (optional)
To enlarge the phones memory you
may use an optional
MultiMediaCard. To insert it into
the phone:
• Open the battery lid on the back-
side of the phone (p. 6) to unlock
the MultiMediaCard lid.
• Push onto MultiMediaCard lid to
open it n .
• Put MultiMediaCard into the slot.
The contacts on the MultiMedia-
Card must show down and to the
slot. Make sure the angled corner
is in the correct position o .
• Close MultiMediaCard lid until it
engages.
Note
MultiMediaCard must be removed only
when the phone is switched off, because
otherwise the content can be destroyed.
n
o