Making a phone call – Siemens SX1 User Manual
Page 15
Making a phone call
14
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:15)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_phonecall.fm
Private
You can have a private conversation
with one of the conference partici-
pants:
OptionsKConferenceK
Private
Select participant.
B
Press
Private
.
You can now have a private discus-
sion, while the rest of the confer-
ence participants continue talking.
To end the private conversation and
go back to the conference:
OptionsKAdd to conference
Drop
To remove one participant from the
conference:
OptionsKConference
K
Drop participant
Select participant.
B
Press
Drop
.
Options during a call
Mute/Unmute, End active call, End all
calls, Hold/Unhold,
Swap
, Conference,
Add to conference
, Private
,
Drop
participant
, Transfer,
Answer
, Reject,
Send DTMF,
Activate loudsp.
Most relevant functions:
Mute/Unmute
Switch microphone on/off. If
switched off, the person on the oth-
er end of the line cannot hear you
(muting)
Transfer
The original call is joined to the sec-
ond one. For you, both calls are now
ended
Send DTMF
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
*
Press to produce a *.
#
Press to produce a #.
*
Press repeatedly to pro-
duce "p" for a pause of ap-
prox. 2 seconds, and
"w" if you want the re-
maining sequence not to
be sent until you press
Send
again during the call.
B
Press
OK
to send the tone.
Note
To store DTMF tones as an
Contacts