Siemens SX1 - Manual (Page 24)

Contacts
23
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:15)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_contacts.fm
B Press Quit if you don’t
want to save recording.
When the voice tag is
saved, a symbol can be
seen next to the number
in the addressbook entry.
Apply
Press Voice Dialling key on the side
of the phone.
A short signal sounds. Now say the
name. The phone answers with the
original voice tag and displays the
number and name. The number will
be dialled after 1.5 seconds.
B
Press Quit if you don’t
want to make this call.
Editing Options
Playback, Delete, Change
Add a ringtone
You can set a specific ringtone for
each entry or group. When that entry
or group member calls you, this ring-
tone will be played.
Open Contacts and select the
required entry. Open the entry
or
move the joystick to the right to
open the Groups list.
then
OptionsKRinging tone
Select required tone.
B
Press Select .
Note
To view the list of all defined voice tags:
Open Contacts:
OptionsKContacts infoKVoice tags
To hear a voice tag, select it:
OptionsKPlayback
Note
The phone number of the caller must be
sent with the call to become recognised
(see also Send my caller ID , p. 69).
Note
All entries in a group get the same ringtone
you assign to the group, even if they had
their own one before.