Alarm clock, Extras, Clock settings – Siemens SX1 User Manual
Page 64: Alarm setting, Turn off the alarm, Clock options
Extras
63
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:16)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_extras.fm
Further options
Only available, when the JAD file
contains an URL address.
Go to URL address
A data connection will be estab-
lished to get additional information
about the application.
Update
A data connection will be estab-
lished to check if there is an update
available.
Alarm clock
C
K
ExtrasKAlarm clock
Clock settings
OptionsKSettings
See
Settings
/
Date and time
Alarm setting
Use this function to set a single time
for the alarm call. The alarm sounds
even when the phone is switched
off.
OptionsK
Set alarm
Key in the alarm time.
Turn off the alarm
A
Press
Stop
to turn off the
alarm.
B
Press
Snooze
or any key
to interrupt the alarm for
10 minutes. You can re-
peat this up to 5 times.
Clock options
Set alarm, Reset alarm, Remove alarm,
Settings, Exit.
Download Java
™
applications
via WAP
WAP can be used to download applications from
the Internet. Downloading or running applications
will not affect or change the software already in-
stalled on your Java™-enabled mobile phone.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications or software and for any direct dam-
age or consequential damage of whatever nature
resulting from the use of these applications or
software. For technical reasons, such applica-
tions or software and subsequent enabling of cer-
tain functions are lost in the event of the device
being replaced/re-supplied and may be lost if it is
repaired. In these cases the purchaser will need
to download the application again or re-enable it.
Siemens does not warranty or guarantee or ac-
cept any liability for the customer's ability to
download or enable applications again or to do so
free of charge.
Note
The phone switches on automatically when
the alarm time is reached. After you have
pressed
Stop
, you can continue working
with the phone by pressing
Yes
.