Siemens SX1 - Manual (Page 13)

Making a phone call
12
SX1 K1 en, A31008-H6500-A1-3-7619 (13. June 2003, 12:15)
© Siemens AG 2001, O:\Mobil\SX1_(K1)\en\k1gb_phonecall.fm
Making a
phone call
Dialling with number
keys
The phone must be switched on
(standby mode).
M Enter the number (always
with prefix).
0
Press to set the inter-
national prefix + .
G
A short press clears
the last digit, a long press
clears the entire number.
D Press the Call key. The dis-
played phone number is
dialled.
Dialling using Contacts
Press the joystick or move it down to
open Contacts (in standby mode)
or
C
K Contacts
Select required entry.
D
Press the Call key to start
the call.
For further information see p. 20.
Accept call
The phone must be switched on
(standby mode).
D
Press.
or
B
Press Answer .
If the phone number has been trans-
mitted by the network, it is dis-
played. If it is stored in the Address-
es, the corresponding name/picture
is displayed.
End call
E
Press the End key.
Dialling Options
Add to Contacts ( Create new, Update
existing ), Call, Send (Text message/
Multimedia message).
Note
You can assign a phone number to keys
2 to 9 for shortcut (p. 69).
Note
End an active call even if the person on the
other end of the line has hung up first.