Sun Microsystems Gigabit Ethernet MMF/UTP Adapter - Manual (Page 50)

16 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
b. Then use the .properties command to make sure that the device is connected
to the network.
Your output will be similar to the following example:
ok cd /pci@7c0/pci@0/pci@8/network@0,1
ok .properties
ok device-end
assigned-addresses 82060110 00000000 00360000 00000000 00020000
82060114 00000000 00380000 00000000 00020000
81060118 00000000 00000020 00000000 00000020
82060130 00000000 003a0000 00000000 00020000
phy-type pcs
board-model 501-7290
version Sun PCI-E 1G Ethernet MMF Adapter FCode 1.9
05/09/08
model SUNW,pcie-northstar
d-fru-len 00000800
d-fru-off 00006800
d-fru-dev eeprom
s-fru-len 00000800
s-fru-off 00006000
s-fru-dev eeprom
compatible pciex8086,105f.108e.115f.6
pciex8086,105f.108e.115f
pciex108e,115f
pciex8086,105f.6
pciex8086,105f
pciexclass,020000
pciexclass,0200
reg 00060100 00000000 00000000 00000000 00000000
02060110 00000000 00000000 00000000 00020000
02060130 00000000 00000000 00000000 00020000
max-frame-size 00010000
address-bits 00000030
device_type network
name network
local-mac-address 00 15 17 00 02 31
fcode-rom-offset 00011800
interrupts 00000002
class-code 00020000
subsystem-id 0000115f
subsystem-vendor-id 0000108e
revision-id 00000006
device-id 0000105f
vendor-id 00008086