Updating sunvts to recognize the adapter, Table b-1 – Sun Microsystems Gigabit Ethernet MMF/UTP Adapter User Manual
Page 104
70
Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
Select the document for the Solaris release on your system.
Updating SunVTS to Recognize the
Adapter
Current versions of SunVTS do not recognize the Sun PCI-Express Dual Gigabit
Ethernet Low-Profile adapter. You must update the SunVTS configuration.
▼
To Update SunVTS to Recognize the Low-Profile
Adapter
1. Connect a loopback cable.
2. Ensure that the SunVTS software and the ipge driver are installed on your
system.
3. Add the following lines to the /opt/SUNWvts/lib/conf/netlbtest.conf and
/opt/SUNWvts/lib/conf/nettest.conf
files:
TABLE B-1
SunVTS Documentation
Title
Description
SunVTS User’s Guide
Describes the SunVTS diagnostic environment
SunVTS Test Reference Manual
Describes each SunVTS test (including the nettest)
and describes the various test options and
command-line arguments
SunVTS Quick Reference
Provides an overview of the user interface
ipge ipge 1GbE