beautypg.com

To set e1000 parameters in a linux environment, To set e1000 – Sun Microsystems Gigabit Ethernet MMF/UTP Adapter User Manual

Page 117

background image

Appendix C

Installing the Sun PCI-Express Dual Gigabit Ethernet Device Driver on Linux Platforms

83

▼

To Set e1000 Parameters in a Linux
Environment

1. Remove the Sun PCI-Express Dual Gigabit Ethernet device driver, if it is already

loaded.

2. Load the Sun PCI-Express Dual Gigabit Ethernet device driver:

Or you can use the insmod command:

where VAL1 applies to the first e1000 interface and VAL2 to the next interface and so
on.

# rmmod e1000

# modprobe e1000

option=VAL1, VAL2, . . .

# insmod e1000

option=VAL1, VAL2, . . .

See also other documents in the category Sun Microsystems Hardware: