Sanyo scp8300 - Manual (Page 91)

84
9. Voice Services
Using Voice-Activated Dialing
You can use a Voice Dial tag to automatically dial a phone number
in your Contacts list. Your phone can store up to 30 Voice Dial
tags. (To create a Voice Dial tag, see “Programming Voice Dial Tag
to Your Phone” below.)
With the flip open:
1. Press or briefly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice Dial
tag into your phone’s microphone.
Note: To use this feature, you must have stored entries (see
“Programming Voice Dial Tag to Your Phone” below).
Programming Voice Dial Tag to Your Phone
1. Press to access the main menu.
2. Highlight Tools/Extras and press .
3. Highlight Voice Services and press .
4. Highlight Voice Dial and press .
5. Highlight Program and press .
6. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
7. Respond to the prompt by repeating the name after the beep.
8. Highlight the Voice Dial entry (name) in the Contacts list, and
press .
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 84