Sanyo scp8300 - Manual (Page 103)

Making a 10-4 Call by Entering a Number
1. From standby mode, enter the 10-4 number you want to dial.
2. Press to place the 10-4 call.
ᮣ The contact’s name appears if there is a matched number in
your 10-4 List.
3. Continue with the 10-4 call, pressing and holding to
speak and releasing it to allow others to reply.
4. When the call is finished, press .
– or –
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight Enter 10-4# and press .
3. Enter the 10-4 number you want to dial.
4. Follow steps 2-4 above.
Missed Call Notification for 10-4 Calls
When an incoming 10-4 Call is not answered, the Missed Call
Notification is displayed on your screen.
To call the last Missed 10-4 Call:
ᮣ Simply press and hold while the Missed Call Notification
is displayed. (Continue with the 10-4 call as described
previously.)
To erase the Missed 10-4 Call Log:
ᮣ Press (right softkey).
Note: When you display Missed Calls entries, you will see the icon
next to the name. Once you confirm the entry by pressing , the icon
turns to the icon. The icon will remain until you make or receive a
10-4 call to or from the entry.
Dismiss
Go to
10-4
96
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 96