Sanyo scp8300 - Manual (Page 31)

Using One-Touch Speed Dialing
With this feature, you can dial Speed Dial entries using one key
press for locations 2-9. (See page 69 for storing a Speed Dial
number.)
To use speed dial for voice calls:
ᮣ From standby mode, press and hold the appropriate key for
approximately two seconds.
– or –
From standby mode, press the appropriate key and
press or .
The display confirms that the number has been dialed when it
shows “Connecting...”.
To use speed dial for 10-4 calls:
ᮣ From standby mode, press the appropriate key then press .
(See “Setting Speed Dialing for 10-4 Entries” on page 107.)
The display confirms that the number has been dialed when it
shows “10-4 calling...”.
24
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 24