Sanyo scp8300 - Manual (Page 15)

Using the Battery
Installing the Battery
To install the LiIon battery:
ᮣ To install, insert the battery into the opening on the back of
the phone and gently press down until the latch snaps into
place.
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. Press the battery release latch up and remove the battery from
the phone at a 45-degree angle.
8
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 8