Sanyo scp8300 - Manual (Page 42)

Display Settings
Changing the Greeting
To display or change your custom greeting:
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Display and press .
4. Highlight Greeting and press .
5. Highlight Custom and press .
6. Customize the greeting using your keypad. (See “Selecting a
Character Input Mode” on page 25.)
7. Press .
To select the default greeting:
1. Follow steps 1-4 above.
2. Highlight Default and press .
Changing the Backlight Time Length
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Display and press .
4. Highlight Backlight and press .
5. Highlight Main LCD, Key or Sub LCD and press .
6. Select Always On, Always Off or your defined time length and
press .
Note: If you select Always On above, once you turn your phone off and
then on again, the setting returns to the setting you set before changing
to
Always On .
Note: Long backlight settings affect the battery’s talk and standby times.
Note: Depending on the Sleep Mode setting, the LCD backlight turns off
even if the setting is Always On . (See page 46 for details.)
35
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 35