Sanyo scp8300 - Manual (Page 114)

Setting Speed Dialing for 10-4 Entries
1. Press to access the main menu.
2. Highlight Contacts and press .
3. Highlight Speed Dial #s and press .
4. Highlight an unassigned number and press .
5. Press (left softkey), highlight the list from which you
want to set a speed dial (Company List, Company Grps.,
Personal List, or Personal Grps.) and press
.
6. Select the contact and press .
– or –
Select the group and press
, select an option, and
press .
ᮣ Set as to assign the selected group as a speed dial.
ᮣ Details to display the group details. You can select the group
member from the group list.
To use Speed Dial for a 10-4 entry:
ᮣ From standby mode, press the appropriate key and press and
hold .
Setting 10-4 Guard
This feature enables you to display the warning message when
you cannot receive 10-4 calls. The warning message appears
when you are launching the Web.
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight 10-4 and press .
4. Highlight 10-4 Guard and press . (A message will appear.)
5. Press (left softkey) to continue.
6. Select On and press .
ᮣ To deactivate this feature, select Off during step 6 above.
OK
Go to
107
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 107