Siemens Gigaset M49AM - Manual (Page 24)

Gigaset M49AM user manual
24
Record message for family members
Press down the Family Message/ Record key, when you hear beep and
the answering machine is in Recording mode. Now, you can record
your message for your family members. Release the key to end
recording.
Note: This message is no longer than 3 minutes.
Incoming message
When an external call comes in and enters the answering system, after
the Owner Message the machine will sound a “DU” when entering the
message-recording mode. When the caller hangs up, the recording will
be ended.
Incoming message playback
When you see the indicator of the answering machine is flashing, you
know there are new messages for you.
Press the Play/Pause key, then the phone will automatically play the
messages one after another. (The date, time and sequence number of
the messages will be displayed on the display.)
During message playing, press the Play/Pause key to pause playing
and press again to resume.
Press the Stop key during playing will stop playing the messages.
Note: If an external call comes in during message playing, the playing
will be ended and the phone will ring.
Forward searching
During message playing, press once the Forward key to skip the
current message and play the next one. When the last message is
played, you will hear “Message playing completed”.
Backward searching
During message playing, press once the Backward key to repeat the
current message and quickly press twice that key to play the previous
one. When the last message is played, you will hear “Message playing
completed”.
Incoming message erase
During message playing, press once the Delete key to erase the
current message.
Press and hold the Delete key for 3 seconds, and then you will see
“Erase All Messages” on the display. Press again the same key to
erase all messages.
᪂า