Siemens Gigaset M49AM - Manual (Page 15)

Gigaset M49AM user manual
15
number you want to redial.
Press the Hands-free key on the base or the Talk/Flash key on the
handset, and then the selected number will be dialed out
automatically.
Or press the Hands-free key on the base or the Talk/Flash key on
the handset first, and then press the Redial key to dial out the
selected number.
Holding a Talk
When you are talking over the base or the handset, press the Hold
key to pause talking without ending the call. When you are ready
to resume the talk, simply press the same key again.
Note: During holding, if you want to transfer the call to a handset
or a base, please refer to “Incoming Call Transferring” program.
Temporary Switching to Tone Dialing
This function is designed for pulse dial users. This function can
change the pulse dialing to tone dialing temporarily to access the
service systems that requires tone dialing. For example, after
accessing banks or credit card companies, if the user wants to
operate in their internal system, then he/she must change the pulse
dialing to tone dialing temporarily.
When the call is put through, press Tone key, then the numbers
dialed later are all in Tone mode.
Note: The change of dial modes is only valid for this call. When
the call ends, it will automatically return to the original dialing
mode.
Displaying Incoming Numbers (Calling Line
Identification)
This phone can display incoming call numbers from FSK or
DTMF system and save up to 40 numbers (15 digits or letters),
and each number is recorded with its incoming time (only
applicable for FSK system.).
Searching Incoming Numbers
Press the Incoming call key on the base or the handset, you will
see the number of calls you have received on the display.
Press ͩ or - key to display the latest incoming call number,
press again the same key to display the next incoming call
number.
Press Ʒ or - key to display the previous incoming call number.
Press the Exit key on the base or End key on the handset to exit.
Note: If certain numbers are repeated, there will be indicators
“Repeat” with the numbers.