Siemens Gigaset M49AM - Manual (Page 21)

Gigaset M49AM user manual
21
the others will still be sounding. Or press again the Paging key on
the base to stop paging all handsets.
Note: If there is no answer, the paging will stop in 2 minutes.
Internal talking (paging)
The base paging the handset(s)
In standby, press the INT key on the base, you will see “Paging
Extension?” on the display. Then press one handset number.
(Press 1 2, 3 or 4 that stands for the corresponding handset).
The relevant handset will sound.
Press the INT key or the Talk key on the handset to start
inter-talking.
Press the INT key on the base or the handset to end the
inter-talking.
The handset paging the base or other handsets
In standby, press the INT key on the handset.
You will see “Paging Extension?” on the display. Then press “0”
to page the base, or the handset number (1, 2, 3 or 4) to page the
handset(s).
The base or the relevant handset(s) will sound.
Press the INT key or hands-free key on the base to start
inter-talking with the handset. “Intercom” will appear on both the
handset and the base. You can also press the INT key or Talk key
on the other handsets to inter-talk with the handset. Then,
“Intercom” will appear on the display of both handsets.
Press the INT key on the base or INT key or End key on the
handset to end the inter-talking.
Note:
1. When then handset is inter-talking and a call comes in, it
will ring. Press the Talk/Flash key on either side to answer
the incoming call.
2. If you have entered the name of the handset on
registration, the name will be displayed on the screen of
the other handset.
3. The paging ring will last 2 minutes. If the paged handset
does not answer, the paging handset will ring, “No
Answer” will be displayed on its display and it will return
automatically to Standby status.
Transferring calls
When you are answering a call, you can transfer the call to the
base or another handset.