Siemens Gigaset M49AM - Manual (Page 23)

Gigaset M49AM user manual
23
Three-party conference
This function is applicable for 2 registered handsets to talk to an
external caller.
When one handset answers the call, press the INT key, and you will
see “Line on Hold Extension?” on the display. Then press the number
of the other handset.
Then the paged handset will ring; you can press the INT key to talk to
the paging handset. If the paged handset is not willing to answer the
incoming call, simply press the End key to end the intercom.)
During inter-talking, press the Talk/Flash-out key on the paging
handset to enter Three-Party Conference mode, and “Conference” will
appear on the display of both handsets.
Note: The paging ring will last for 2 minutes. After 2 minutes, if the
other handset does not answer, the ring will stop. “No Answer” will be
displayed on the display of the paging handset and this handset will
resume talking to the caller.
Or
When the first handset is talking to an external caller, users can press
the Talk key on the other handsets to enter the conference.
Using the answering machine
Turning On/Off the answering machine
The answering machine must be turned on to work automatically.
Press once the On/Off key to activate the answering machine. Then
the phone will indicate “Answering function activated” and the
indicator will light.
Press the same key again to deactivate the answering machine. Then
the phone will indicate “Answering function deactivated” and the
indicator will be off.
Record and play owner message
Press down the Owner Message/ Record key, when you hear beep and
the answering machine is in Recording mode. Now, you can record
your message. Release the key to end recording and play the message.
Press once the Owner Message/ Record key to play the recorded
message, and press the Stop key to end play.
Note: The message is no longer than 2 minutes. ⒮ᮁ
⒮ᮁ