Siemens Gigaset M49AM - Manual (Page 20)

Gigaset M49AM user manual
20
Dialing SOS Number
In Standby, press the SOS key on the handset then the Talk/Flash key
to dial out the SOS number.
Or
Press the Talk/Flash key on the handset, and then press the SOS key to
dial out the SOS number.
Storing IP number
The handset and the base can respectively save an IP number with 48
digits and 15 letters.
In standby, press the IP key for 3 seconds, and you will see “IP: Enter
name” on the display. Then press the digit (letter) keys to enter the
name.
Press the Set up key, and then you will see “IP: Enter number”. Then
enter the IP access number.
Press twice the Pause key and press 1 or 2 or 3 to select the language.
Press twice the Pause key and enter IP card number and pin.
Press the Set up key to confirm.
Note: If wrong letters or digits are entered, press the Delete key on the
base or the Redial/Delete key on the handset to modify. If you want to
exit, simply press the Exit key on the base or the End key on the
handset to exit. (Above program is just for reference. You can set
different program by different IP cards.
IP dialing and dial back
To dial a long-distance number with IP:
z When the handset or the base is in standby, enter the
long-distance number and then press IP key. The phone will
automatically dial with the IP number added before the
long-distance number.
z When you are browsing the incoming calls with the handset
or the base, select the number you want to call out, then press
the IP key. The phone will automatically dial with the IP
number added before the long-distance number.
z Press the Hands-free key on the base or the Talk key on the
handset and then, the IP key. You will hear dial tone, then
you can enter the long-distance number.
Paging and Intercom function
Searching for the handset (paging)
Press Paging key + * key on the base, then all the registered handsets
will sound and the display will display “Paging From Base”. You can
press the Talk/Flash key on one of the handsets to stop the paging, but