Symbol Technologies MC3000 - Manual (Page 69)

Accessories 2-29
Serial/USB Communication
This section provides information on installing the appropriate serial/USB communication software and setting up the appropriate
accessory to enable serial/USB communication between the mobile computer and the host device.
The mobile computer is capable of communicating with a number of hosts, including development computers, serial devices, printers,
etc. The communication accessories serve as data communication devices, enabling the information on the mobile computer to be
synchronized with the information on the host device using ActiveSync. With the appropriate accessory and software, the mobile
computer can establish a serial connection or a USB connection.
For a serial or USB connection, use one of the following:
• Single Slot Serial/USB cradle
• MC3000 Communication/Charge cables.
Installing Serial/USB Communication Software
To successfully communicate with various host devices communication software, such as Microsoft ActiveSync (version 3.7 or higher)
must be installed on the host computer. See
Chapter 3, ActiveSync for ActiveSync installation procedures.
Communication Setup
The communication setup procedures for the Single Slot Serial/USB cradle and the MC3000 Communication/Charge cables are
provided in this section as an example. The serial communication setup procedures are provided in,
Serial Communication Setup on
page 2-30 and the USB setup procedures are provided in, USB Connection Setup on page 2-32 .