Spare battery charging, Led charge indications – Symbol Technologies MC3000 User Manual
Page 56
MC3000 Integrator Guide
2-16
Spare Battery Charging
To charge up to four MC3000 spare batteries:
1.
Insert the spare battery into the spare battery charging slot, bottom first.
2.
Pivot the top of the battery down onto the contact pins.
Figure 2-14. Four Slot Spare Battery Charger
3.
Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than four hours and
the Extended Life Battery usually charges in less than six hours. See
for charging status indications.
4.
When charging is complete, press the battery clip and lift battery out of the slot.
LED Charge Indications
The Spare Battery Charging LEDs indicate the spare battery charging status. The Spare Battery Charging LEDs are arranged in the
same pattern as the spare battery charging slots so that the charging status of each battery can be identified. See
for charging status indications.
Power Supply
Spare
Batteries
Spare
Battery
Charging
Slot
Spare Battery
Charging LEDs (4)
Battery
Clip
1
2