Symbol Technologies MC3000 - Manual (Page 132)

MC3000 Integrator Guide 7-18
When a user selects None as an authentication and TKIP as an encryption, the user is forced to enter a passkey. The user cannot enter
a passkey if the encryption is TKIP and the authentication is anything other than None.
Figure 7-22. Passkey Dialog Box
Tap Next. The IP Mode dialog box displays.
IP Mode
Use the IP Mode dialog box to configure network address parameters: IP address, subnet, gateway, DNS and WINS.
Figure 7-23. IP Config Tab (DHCP)
Select either DHCP or Static from the drop-down list and then tap Next. If Static IP is selected, the IP Address Entry dialog box
displays. If DHCP is selected, the Transmit Power dialog box displays.
Table 7-12. IP Mode Options
Encryption Description
DHCP Select Dynamic Host Configuration Protocol (DHCP) from the IP Mode drop-down list to obtain a leased IP
address and network configuration information from a remote server. DHCP is the default setting for the
mobile computer profile. When DHCP is selected, the IP address fields are read-only.
Static Select Static to manually assign the IP, subnet mask, default gateway, DNS and WINS addresses used by the
mobile computer profile.