Symbol Technologies MC3000 - Manual (Page 59)

Accessories 2-19
Universal Battery Charger (UBC) Adapter
The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with the four station
UBC2000 to simultaneously charge up to four spare batteries. For additional information on the UBC 2000, refer to the UBC 2000 Quick
Reference Guide, p/n 70-33188-xx.
Use only a Symbol approved power supply output rated 15 VDC and minimum 1.5 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See the MC3000 User Guide for
the power supply regulatory compliance statement.
Setup
Connect the UBC Adapter to a Symbol approved power source.
Figure 2-17. UBC Adapter Setup
Spare Battery Charging
To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
Power Supply
AC Line Cord
DC Cable
Power Port