Symbol Technologies MC3000 - Manual (Page 36)

MC3000 Integrator Guide 1-16
Main Battery Removal
Before removing the main battery, press the red Power button to turn off the screen and set the mobile computer to suspend mode.
To remove the main battery:
1. Rotate the latches to the open position.
Do not lift up on the Latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
2. Lift the Hand Strap to lift the Strap/Door Assembly off, bottom first.
3. Release battery:
a. On the MC3000-K/R, release the battery clip (at the top of the battery) and lift the battery out top first.
b. On the MC3090-G, pull the battery pull tab to unclip the battery and lift the battery out top first. If the battery does not
have a pull tab, use the stylus to unclip the battery and then lift the battery.
Figure 1-10. Main Battery Removal (MC3000-K/R)
Battery Clip
Latches Strap/Door
Assembly
Battery
Hand Strap