Passkey dialog -17, Key entry page – Symbol Technologies MC3000 User Manual
Page 131
Wireless Applications
7-17
Key Entry Page
If either 40-Bit WEP or 128-Bit WEP is selected the wizard proceeds to the key entry dialog box unless the Use Passkey check box
was selected in the Encryption Dialog Box (see
). To enter the key information:
1.
Enter the 40-bit or 128-bit keys into the fields.
2.
Tap Next.
Figure 7-20. 40-Bit WEP Keys Dialog Box
Figure 7-21. 128-Bit WEP Keys Dialog Box
Passkey Dialog
When a user selects None as an authentication and WEP as an encryption, the user can chose to enter a passkey by checking the Use
PassKey check box. The user is prompted to enter the passkey. For WEP, the Use PassKey checkbox is only available if the
authentication is None.
TTLS
No
Yes
Yes
Table 7-11. Encryption / Authentication Matrix
Encryption
Authentication
Open
WEP
TKIP