Led charge indications, Communication setup, Led charge indications -6 communication setup -6 – Symbol Technologies MC3000 User Manual
Page 46
MC3000 Integrator Guide
2-6
LED Charge Indications
The Single Slot Serial/USB cradle uses the amber Charge LED Indicator to indicate MC3000 battery charging status and the Spare
Battery Charging LED to indicate spare battery charging status. See
for charging status indications.
Communication Setup
To connect the Single Slot Serial/USB cradle to a serial or USB device:
1.
Connect Single Slot Serial/USB cradle cable to the communications port.
2.
Slide the mobile computer into the mobile computer slot. The amber Charge LED Indicator indicates the mobile computer
battery charging status and that the mobile computer is seated in the cradle. For more information on communications setup
procedures, see
USB Connection Setup on page 2-32
and/or
Serial Communication Setup on page 2-30
.
Table 2-1. LED Charging Status Indicators
LED
Indication
Mobile Computer Charging (LED on mobile computer)
Off
Mobile computer not placed correctly in the cradle; cable not connected correctly; charger is not powered.
Fast Blinking Amber
Error in charging; check placement of mobile computer.
Slow Blinking Amber
Mobile computer is charging.
Solid Amber
Charging complete.
Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery
power is low or the battery is not fully inserted.
Spare Battery Charging (LED on cradle)
Off
No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Fast Blinking Amber
Error in charging; check placement of spare battery.
Slow Blinking Amber
Spare battery is charging.
Solid Amber
Charging complete.