Sony SNC-RZ25P - Manual (Page 73)

Ot
her
s
Using the SNC audio upload tool — Transmitting Audio to Camera
73
Auto detect
The proxy setting is obtained automatically from
Internet Explorer.
Proxy address
Type the IP address or host name of the proxy server.
Proxy port
Type the port number used for communications with the
proxy server.
Audio upload tab
Use this menu to transmit audio from the computer to
the camera.
Before transmitting, set Speaker output to On on the
Common tab of the Camera menu.
N (start)/x(stop)
Click
N (start) to start audio transmission. The
transmission speed is displayed in the Bitrate box during
transmission. You can adjust the microphone volume
and enable/disable the muting, if necessary.
To stop the audio transmission, click
x(stop).
Note
Audio transmission stops if you switch the tab during
the transmission.
Sound adjustment and indicators
Adjust the microphone input volume by moving the
slider bar. You can adjust the volume even
during transmission.
Click
to enable/disable sound muting. The
microphone input volume is displayed at the Level.
The transmission rate is displayed in the Bitrate box.
Voice alert tab
It cannot be used in this camera.