Sony SNC-RZ25P - Manual (Page 26)

O
per
at
ing
t
he
Came
ra
Controlling Alarm output 1, 2 / Controlling Day/Night Function
26
Controlling Alarm output
1, 2
You can control the Alarm output 1, 2 On (short-circuit)
and Off (open).
To use this function, you need to make Alarm output 1
or Alarm output 2 active in the Trigger setting menu on
the Administrator menu (page 58).
1
Monitor the image on the monitor window.
2
Select Alarm output1 or Alarm output2 from the
Trigger list box.
3
Click .
Each click switches the Alarm output between On
(short-circuit) and Off (open) alternately.
Tip
For the connection of peripheral devices to the Alarm
output of the I/O port, see the supplied Installation
Manual.
Controlling Day/Night
Function
You can control the Day/Night On (night mode) and Off
(day mode). To use this function, you need to make Day/
Night active in the Trigger setting menu on the
Administrator menu (page 58).
1
Monitor the image on the monitor window.
2
Select Day/Night from the Trigger list box.
3
Click .
Each click switches the Day/Night between On
(night mode) and Off (day mode) alternately.