Picture tab – Sony SNC-RZ25P User Manual

Page 36

mini

tra

ting
t

Came

Setting the Camera Image and Audio — Camera setting Menu

when Optical is selected, an image can be zoomed up to
18X optical zoom.

Focus mode

Selects Focus mode. When Auto is selected, the focus is
automatically adjusted.
When Manual is selected, the focus can be adjusted by
using the NEAR, FAR and ONE PUSH FOCUS
buttons of the control panel displayed from the main
viewer.

Microphone

Select whether you send the audio from the m
microphone input connector. Select On to send the
audio from this network camera.

Note

When you change the Microphone setting, click
Refresh on the Web browser to reflect the change when
opening main viewer page.

Mic volume

Set the volume level of the audio input from the m
microphone input connectors. It is adjustable from –10
to +10.

Audio codec

Select the bit rate when you send the audio from the m
microphone input connectors. G.711 (64kbps), G.726
(40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.

Note

When the bit rate is set to other than G.711(64bps), the
audio is not output in case of using Java applet viewer.

Speaker output

Set whether you output the audio sent from the computer
connected with the audio input connector to the speaker
(active speaker for example) of the camer aconnected
via line output connectors using SNC audio upload tool
included in the supplied CD-ROM.
Select On to accept the audio data transmission from
SNC audio upload tool.

OK/Cancel

See “Buttons common to every setting menu” on page
29.

Picture Tab

You can set the color condition, exposure, etc. of the
camera.

White balance

Select the white balance mode from among Auto,
Indoor, Outdoor, One push WB, ATW, and Manual.
Auto: to automatically adjust the color to be close to the

one you are viewing. (approximately 3000K to
7500K)

Indoor: to adjust the white balance for shooting indoors

under an incandescent lamp (about 3200 K)

Outdoor: to adjust the white balance for shooting

outdoors (about 5800 K)

One push WB: The One push trigger button is

displayed. Click the button to adjust the white
balance instantly.

ATW: Makes the subject to lights and automatically

adjusts to re-create the original color. (approximately
2000k to 10000k)

Manual: When you select this, R gain and B gain are

displayed and you can set them.
Selectable gain values are from 0 to 255.

Exposure mode

Select the exposure mode of the camera from among
Full auto, Shutter priority, Iris priority, and Manual.
The setting items required for each setting appear.

Full auto: The camera executes the gain adjustment and

the iris adjustment automatically. In this case, the
shutter speed is fixed.
When you select this, Slow shutter and Backlight
compensation are displayed and you can set them as
you require.

Shutter priority: The camera executes the gain

adjustment and the iris adjustment automatically and
you can select the shutter speed. When you select it,
Shutter speed are displayed and you can set them.