Sony SNC-RZ25P - Manual (Page 48)

A
d
mini
s
tra
ting
t
he
Came
ra
Sending an Image via mail — e-Mail (SMTP) setting Menu
48
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input1: The external sensor which is connected
to sensor input1 of the camera I/O port.
Sensor input2: The external sensor which is connected
to sensor input2 of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection setting menu is displayed. You
can set the motion detection function (page 61).
Notes
• Motion detection works only when the camera Video
mode is set to MPEG4 and the Cropping is set Off.
• In the case that the synchronized preset position is
specified, the alarm event that happens during moving
to the preset position will be invalid.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the
Effective period is displayed. (“Setting the Schedule
— Schedule setting Menu” on page 59)
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Periodical sending Tab — Setting
the periodical mail sending mode
You can set to send mails periodically.
Periodical sending
Select On when you want to send mails periodically. If
you select Off, Periodical sending is not executed.
Image file name
Type the file name of the image attached to the mail up
to 10 alphanumeric, - (hyphen) and _ (under score).
Suffix
Select a suffix added to the file name used when the mail
is sent.
None: The name of the sent file will be the Image file
name.
Date & time: The date & time suffix is added to the
Image file name.
The date & time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number
returns to 1.
Interval
Type the interval at which you want to send a mail
periodically. You can set the hour (H) and minutes (M)
between 30 minutes and 24 hours (one day).