Sony SNC-RZ25P - Manual (Page 60)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Alarm Buffer — Alarm buffer setting Menu
60
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Setting the Alarm Buffer
— Alarm buffer setting Menu
When you click Alarm buffer on the Administrator
menu, the Alarm buffer Setting menu appears.
You can set the Pre-alarm image and audio (the image
and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm
sending or Alarm recording of FTP client setting menu
or Image memory setting menu is set to On, and besides
when Use alarm buffer is selected.
Video mode
The Video mode setting in the Common tab of the
Camera setting menu is displayed.
MPEG4: Shows the present output format of the camera
is MPEG4.
JPEG: Shows the present output format of the camera is
JPEG.
Recording capacity
Displays the maximum recording capacity of alarm
buffer in the present camera setting of the video mode,
image size, bit rate and frame rate.
Pre-alarm period: Displays the maximum recording
capacity of image/audio before the alarm detection.
Post-alarm period: Displays the maximum recording
capacity of image/audio after the alarm detection.
Recording time
Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre alarm period: Type the recording time of the
image/audio before the alarm detection.
Post alarm period: Type the recording time of the
image/audio after the alarm detection.