Sony SNC-RZ25P - Manual (Page 13)

Pre
par
at
ion
Basic Configuration by the Administrator
13
Basic Configuration by
the Administrator
You can monitor the image of the camera by logging in
with the initial condition of this network camera. You
can also set various functions according to the install
position, network condition or purpose of the camera.
We recommend you configure the following items
before monitoring the image from the camera.
Setting contents Setting menu
Flip the image according to the installation position (desk top or ceiling). Image flip (page 35)
Set the format of the image sent from the camera (MPEG 4 or JPEG). Video mode (page 34)
Select the white balance mode according to the installing position (indoor or
outdoor). White balance (page 36)
Select the brightness of the image sent from the camera. Exposure mode (page 36)
Brightness (page 37)
Select the quality of the image sent from the camera. MPEG4 Tab (page 38)
JPEG Tab (page 39)
Select the size of the image sent from the camera. Image size (page 35)
Select weather the audio from the external microphone is sent or not. Microphone (page 36)
Accord date and time of the camera with those of the computer. Date & time Tab (page 32)
Make the setting for sending the monitor image attached to a mail. e-Mail (SMTP) setting Menu (page 46)
Set the access right of the user for the camera. User setting Menu (page 44)
Set a place to see beforehand. Preset positin setting Menu (page 63)
Prepare a panorama image. Creating a Panorama Imgae (page 75)