Sony SNC-RZ25P - Manual (Page 23)

O
per
at
ing
t
he
Came
ra
Operating the camera
23
watch, the direction and the zoom position of the camera
move to suit to the red frame.
Zoom an image by the camera
zoom bar
When you can control this function, the zoom bar is
displayed below the window.
You can specify a location to be zoomed by clicking the
zoom bar.
The zoom bar is displayed /not displayed by clicking the
icon below the image frame.
Optical WIDE marge icon: Click to move the
zoom to the optical WIDE Merge (the same
magnification).
Optical TELE marge icon: Click to move the
zoom to the optical TELE Merge (18-fold
magnification).
Digital TELE marge icon: Click to move the
zoom to the digital TELE Merge (216-fold
magnification)
Turning off the zoom bar
When you are not going to use the zoom bar, click
under the panorama window to turn off the
panorama window, then click it again to turn off the
zoom bar.
Note
The zoom bar of the digital area is not displayed when
the “Zoom mode” of the camera setting menu is not set
to Full.
Moving the camera to the preset
position
PRESET list box
Select the preset position name from the drop-down list.
Then, the camera will move to the preset position that
you have stored in memory at “Preset position setting
Menu”.