Setting – Sanyo Multimedia PLC-XD2600 User Manual

Page 57

Setting

Factory default

This function returns all setting values except for the

User

logo, PIN code lock, Logo PIN code lock, Lamp counter

and

Filter counter to the factory default settings.

Factory default

warning log

This function records anomalous operations while the

projector is in operation and use it when diagnosing faults.

Up to 10 warning logs are displayed with the latest warning

message at the top of the list, followed by previous warning

messages in chronological order.

✔

Note:

When the Factory default function is executed, all the

warning log records will be deleted.

This function is used to set a frequency for the filter

cleaning.

When the projector reached a specified time for cleanings,

a Filter warning icon appears on the screen, notifying the

cleaning is necessary. After cleaning the filter, be sure to

select

Reset and set the timer. The Filter warning icon will

not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the

Filter Counter” on page 60.

Filter counter

Press the SELECT button to select

Timer, and then use

the Point

▲▼

buttons to set the timer. Select from (

Off/

100H/ 200H/ 00H) depending on the use environment.

Filter warning icon appears on the screen at a set time.

Fig .1 Filter warning icon

✔

Note:

This icon also appears at turning on.

✔

Note:

The Filter warning icon (Fig.1) will not appear when the

Display function is set to

Off (p.45), during Freeze(p.25),

No show (p.26).