Sanyo Multimedia PLC-XD2600 - Manual (Page 49)

49
Setting
Ceiling
Rear
Ceiling
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Terminal
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back
of the projector is switchable for computer input or monitor
output. (See page 9) Select Computer 2 or Monitor Out
with the Point ▲▼ buttons.
Computer 2 . . computer input
Monitor Out . . monitor out
Terminal function is not available when selecting Computer
2 to the input source. Change the input source to the others
( Computer 1, and so on) so that the Terminal function will
be available. (p.25, 36, 37)