Sanyo Multimedia PLC-XD2600 - Manual (Page 48)

48
Setting
Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point ◄► buttons to fix the number and move the red
frame pointer to the next box. The number changes to
✳
. If you fixed an incorrect number, use the Point ◄►
buttons to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code, Logo
PIN code and the number (✳✳✳✳) will turn red for a
moment. Enter the correct Logo PIN code all over again.
Logo PIN code change
Logo PIN code can be changed to your desired four-
digit number. Press the SELECT button to select Logo
PIN code change. Current Logo PIN code dialog box
appears, use the Point ▲▼buttons to enter the correct
code. The New Logo PIN code input dialog box appears.
Set a new Logo PIN code, confirmation box appears,
choose yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
Use the Point ▲▼ buttons to switch On or Off, and then
press the SELECT button to make a chioce.
Change the Logo PIN code lock setting
Enter a Logo PIN code
After a correct Logo PIN code
is entered, the following dialog
box appears.
CAUTION:
wHEN yOU HAVE CHANGED THE LOGO PIN CODE,
wRITE DOwN THE NEw PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO . MEMO ON PAGE 76 , AND
KEEP IT SECURELy . SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED .
Change the Logo PIN code lock setting
Change the Logo PIN code
Logo PIN code
Next
►
Off
---- Exit
►
Off
Select
Current Logo PIN code