Sanyo Multimedia PLC-XD2600 - Manual (Page 25)

25
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select the
input source. See pages 27, 36-37 for details.
COMPUTER 1/2, VIDEO, S-VIDEO and COMPONENT
buttons
FREEZE button
Display the input source information: Input, H-sync freq .,
V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Keylock, PIN code lock
and Remote control (p.58).
INFO . button
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 35 for details.
D .ZOOM buttons
Remote Control
FREEZE
button
D .ZOOM
buttons
LAMP
button
✔ Note:
See the next page for the description of other
buttons.
LAMP button
COMPUTER 1/2
buttons
VIDEO
button
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
INFO .
button
S-VIDEO
button
COMPONENT
button
Press the FREEZE button on the remote control to freeze
the picture on the screen, meanwhile, volume is muted. To
cancel the Freeze function, press the FREEZE button again
or press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
Fig.1