Star Micronics Star SCP700 Series - Manual (Page 83)

79
N=4 (ESC/POS mode)
n1 :Always “0”
n2 :Always “0”
(Default)
Parameter :n3
Parameter Setting “0”’ “1” “2” “3”
n3 DTR signal during
setting status
transmission
See belows
n4 Data receipt error “?”
printed
Ignored “?”
printed
Ignored
Setting (DTR signal) “0”, “1” “2”, “3”
1. From when the power is turned on or
I/F reset until communication possible
BUSY BUSY
2. Test printing BUSY BUSY
3. Paper feed by paper feed switch — BUSY
4. Stop due to no paper — BUSY
5. During waiting for switch input in
macro execution
— BUSY
6. Other error — BUSY
7. Receiving buffer full BUSY BUSY