Star Micronics Star SCP700 Series User Manual

Page 40

Printer Station Selection (Combo mode only)

“+”

“A”

1B 2B

Print Station Selection
n = 0, “0” : Selects the receipt printer

3, “3” : Selects the slip printer

This command is only valid when it entered at the beginning of a
line. If this command is not set at the beginning of a line, the printer
will ignore the command and continue to print on previously selected
print station.

Character Selection

“R”

Select international character set

Selects an international character set according to the value of n, as
shown below:

12, “0”

“9”, “A”

“C”

n = 0, “0” : U.S.A.

1, “1” : France

2, “2” : Germany

3, “3” : England

4, “4” : Denmark 1

5, “5” : Sweden

6, “6” : Italy

7, “7” : Spain 1

8, “8” : Japan

9, “9” : Norway

10, “A” : Denmark 2

11,

“B” : Spain 2

12, “C” : Latin America

Although the international character set can also be selected using a
memory switch, the control code setting is given priority.

“/”

Select zero style

Causes subsequent zero characters to be printed with a slash when n
is 1, and without a slash when n is 0.
The valve of n can be set to 0(00H) or “0”(30H), or 1(0H) or
“1”(31H).

The default may differ depending on the memory switch setting.

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

≤ ≤

CODE

HEX

FUNCTION