Star Micronics Star SCP700 Series User Manual

Page 46

Sets the printing magnified double in character width.
Prints the subsequent data including a character spacing set by
n, magnified double in character width.

Resets the printing magnified in character width.
Resets the printing magnified in character width set by ,
, “W” n and “i”n1n2.

“W”

Set the magnification rate in character width
Prints the subsequent data with a character width magnified by a rate
specified by the value of n.
Receipt printer: n= 0, “0”: Reset magnification (same as )

1, “1”: Double magnification (same as )
2, “2”: Triple magnification
3, “3”: Quadruple magnification
4, “4”: Quintuple magnification
5, “5”: Sextuple magnification

Slip printer: n= 0, “0”: Reset magnification (same as )

1, “1”: Double magnification (same as )

Sets the printing magnified double in character width.
Prints the subsequent data magnified double in character width.
This command is only valid with the receipt printer.

Resets the printing magnified in character width set by
, “h”n and “i” n1n2.
This command is only valid with the receipt printer.

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION