Star Micronics Star SCP700 Series - Manual (Page 80)

76
Other Commands
18
Cancel printer buffer & Initialize printer
Clears the line buffer, and initializes the commands set already.
Does not affect the external equipment drive conditions set by the
code n1 n2. (This is the same during a mechanical
error.)
(Line buffer means the print data expansion area.)
If is specified in page mode while printing using the slip
printer, printing is not carried out and the printer returns to line mode
from page mode.
In addition, initializes the print station selection. If the slip
printer was selected, the receipt printer will be re-selected.
This command cannot recover from errors or return to the on-line
status from off-line.
13
Deselect printer
Deselects the printer. The printer disregards all subsequent
characters and commands except , which activates the
printer.
11
Set select mode
When the printer receives a code, the deselect mode is
canceled and data following this code is input to the buffer.
1E
Beep the buzzer
Sounds a brief beep tone.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION