Star Micronics Star SCP700 Series - Manual (Page 45)

41
“M”
1B 4D
Receipt printer: Select 12-dot pitch printing
Prints in a 12
×
24 dot font with no spacing between
characters.
Slip printer : Select 7
×
9 (half dot) font
“p”
1B 70
Select 14-dot pitch printing
Prints in a 12
×
24 dot font with 2-dot spacing between characters.
This command is only valid with the receipt printer.
“P”
1B 50
Receipt printer: Select 15-dot pitch printing
Prints in a 12
×
24 dot font with 3-dot spacing
between characters.
Slip printer : Select 5
×
9 (2 pulses = 1 dot) font
“:”
1B 3A
Receipt printer: Select 16-dot pitch printing
Prints in a 12 × 24 dot font with 4-dot spacing
between characters.
Slip printer : Select 5 × 9 (3 pulses = 1 dot) font
n
1B 20 n
Set character spacing
Sets the spacing between characters according to the value of n.
The value of n can be set from 0 through 15, or from “0” through “9”
and “A” through “F”.
The default value of n is 0.
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION