Star Micronics Star SCP700 Series - Manual (Page 34)

30
Chapter 9: Control Codes
Important!
Please access the following URL
http://www.star-micronics.co.jp/service/sp_sup_e.htm
for the lastest revision of the manual.
This printer has two command modes: Star mode and ESC/POS mode.
The Star mode emulates thermal receipt printers such as the TSP200 series and
other previous models. The ESC/POS mode emulates the Epson TM-T85
receipt printer and the Epson TM-295 slip printer.
The Star mode commands are as follows.
Print Station Selection (Combo mode only)
Character Selection
Control codes Hexadecimal codes Function
Receipt-
printer Slip
printer
Page
“+” “A” 0
“+” “A” <0> 1B 2B 41 30
1B 2B 41 00
Select receipt printer 36
“+” “A” 3
“+” “A” <3> 1B 2B 41 33
1B 2B 41 03
Select slip printer 36
Control codes Hexadecimal codes Function
Receipt-
printer Slip
printer
Page
“R” n 1B 52 n
Select international character
set
36
“/” “1”
“/” <1>
1B 2F 31
1B 2F 01
Select slash zero 36
“/” “0”
“/” <0>
1B 2F 30
1B 2F 00
Select normal zero 36
“b” n1 n2 n3 n4
d1 ...
1B 62 n1 n2 n3 n4
d1 ... 1E
Select bar code printing 37
“M” 1B 4D
Select 12-dot pitch printing 41
Select 7 × 9 (half dot) font 41
“p” 1B 70 Select 14-dot pitch printing 41
“P” 1B 50
Select 15-dot pitch printing 41
Select 5 × 9 (2 pulses = 1 dot)
font
41