Sharp FO-IS115N - Manual (Page 67)

Sending a Fax by Automatic Dialling
62
Editing and clearing auto-dial numbers
To make changes to a previously stored auto-dial number, or clear a number,
follow these steps:
1
Press then .
2
Select the number that you wish to edit or delete using one of the
methods below:
•
Rapid Key: If the number is stored in a Rapid Key, press the Rapid Key.
•
Speed Dial: If the number is stored in a Speed Dial number, press
and enter the 3-digit Speed Dial number with the number keys (enter “001”
for Speed Dial 1, “010” for Speed Dial 10, etc.).
•
Search: Press or until the name or number of the destination
appears in the display and press .
Display: [1=EDIT, 2=CLEAR]
3
Press for “EDIT” or for “CLEAR”.
•
If you selected “CLEAR”, go to Step 7.
4
If you selected “EDIT”, make the desired changes to the number.
•
Press or to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit. You can also press to backspace and clear digits.
•
If you do not wish to change the number, go directly to Step 5.
5
Press .
FUNCTION
SPEED DIAL
DEL
START