Sharp FO-IS115N - Manual (Page 65)

Sending a Fax by Automatic Dialling
60
3
Press to select “FAX”.
Display: [FAX # MODE]
4
Enter the fax or phone number by pressing the number keys (maximum
of 32 digits).
(Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (four
seconds per pause). Several pauses can be entered in a row.
•
If you are on a PBX and the number you are storing is for an outside line,
and you have configured the PBX CONNECTION setting for automatic
connection to an outside line (p. 106), do not press the flash key ( ) at
the beginning of the number or enter the prefix for an outside line. If the
number you are storing is for a destination inside your PBX, press
before entering the number.
5
Press .
6
Enter the name of the destination (max. 20 characters).
•
For information on using the letter keys, see page 11.
7
Press .
DEL
REDIAL
R
R
START
START