Sharp FO-IS115N - Manual (Page 51)

Network Settings
46
•
If you make a mistake, press to move the cursor to the mistake and
enter the correct number.
6
When finished entering the number, press .
7
The next setting will appear in the display. Repeat Steps 4 through 6 to
configure the next setting, or press to exit.
START
STOP
Initializing the network settings
If you need to return the network settings to their initial state, follow the steps
below.
♦
Initializing the settings enables DHCP and clears the IP address and
related settings.
1
Press , then until [NETWORK SETTING] appears.
2
Press , then until [INITIALIZE SETTINGS] appears.
3
Press .
Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START]
4
Press .
FUNCTION
START
START