Motorola Timeport 260 - Manual (Page 69)

Using the Options Menu 67 English
Divert Data Calls
This option will enable you to divert all Data calls to a single
number.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
Cancel All Diverting
This option will enable you to cancel the diversion of incoming
calls.
! This option resets all diversion settings to Off and
removes all diversion numbers.
Talk and Fax
This is a network feature that allows you to speak and then send
or receive a fax during the course of a single call.
AYour phone supports a data and fax transmission speed of
up to 9.6 kbps.
Before making a Talk and Fax call, ensure that:
• Your phone is “fax-ready” (it has been switched off,
connected to the fax with one of the optional data/fax
accessories, then switched back on). Connecting your phone
to the fax in the middle of the call will not work.
• The Talk and Fax mode is set to On.
A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message Fax in progress will be displayed. The call
automatically ends when the fax transmission is complete. You
cannot switch back to voice mode in the same call.
AWhile a Talk and Fax call is active, incoming call services like
Call Waiting and Call Holding are suspended.
If you receive a Talk and Fax call when:
• Your phone is not fax-ready - you can only talk.
• Your phone is fax-ready but Talk and Fax mode is off - the call
is automatically routed to your fax (you cannot talk).
On
Switches Talk and Fax mode on for the next and all subsequent
calls.
Off
Switches Talk and Fax mode off for the next and all subsequent
calls.
j Call Waiting
The Call Waiting menu item has two settings On or Off. If you
select Off, you will be not be notified of waiting calls. The
person trying to contact you will either receive the busy tone, or
be diverted by the ‘Detailed Diverting - If Busy’
option.
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer?.
You can press the
O key to accept the waiting call, or use the
$ and then the ª key to scroll to an alternative option and
then press
O.
AIf you have Caller Line Identification, the caller’s number or
name is displayed instead of the Call Waiting message.
AAvailability of this feature depends on your service provider.
l2gti_en.bk : opt_menu.fm5 Page 67 Tuesday, May 23, 2000 9:57 AM