Sonance C4630 SE - Manual (Page 28)

28
C4630 SE HOME AUDIO SYSTEM
6. Open the F ILE menu and
select J OB I NFO :
• The D EALER tab ( Figure 35)
allows you to record
information about the
particular job, including
system design notes,
firmware upgrades, etc.
This information is not
transferred to the C4630 SE
— it is saved only in the sys-
tem program file in your
computer.
• The C LIENT tab ( Figure 36)
gives you a place to record
your client’s contact
information, along with
information about the
general contractor, interior
designer. etc. Like the
D
EALER information, the C LIENT information is saved only in the system program file in your computer and is not transferred
to the C4630 SE.
Renaming C4630 SEs in a System with Multiple Units
To minimize confusion when programming systems with multiple C4630 SEs we
recommend that you rename each unit to identify it, such as “C4630 SE #1 Zones 1-6”,
and “C4630 SE #2, Zones 7-12”.
In the S
YSTEM W ORKSPACE area of the Device screen (see Figure 37), select each
C4630 SE in the system and rename each one with a different name.
Figure 35:
J OB I NFO Screen D EALER Tab
Figure 36:
J OB I NFO Screen C LIENT Tab
System
Workspace
Area
Figure 37:
The S YSTEM W ORKSPACE Area