Handset operating times/charging times, Base station power consumption, General specifications – Siemens Gigaset S450 User Manual
Page 47: Guarantee certificate
46
Appendix
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / appendix.fm / 07.09.2005
Handset operating times/charging
times
The operating and charging times apply
only when using the recommended
batteries.
Base station power consumption
In standby mode: approx. 2 watt
During a call: approx. 3 watt.
General specifications
Guarantee Certificate
Without prejudice to any claim the user
(customer) may have in relation to the dealer,
the customer shall be granted a manufacturer's
Guarantee under the conditions set out below:
u
In the case of new devices and their
components exhibiting defects resulting
from manufacturing and/or material faults
within 24 months of purchase, Siemens
shall, at its own option and free of charge,
either replace the device with another
device reflecting the current state of the art,
or repair the said device. In respect of parts
subject to wear and tear (e.g., batteries,
keypads, casings), this warranty shall be
valid for six months from the date of
purchase.
u
This Guarantee shall be invalid if the
equipment defect is attributable to
improper treatment and/or failure to comply
with information contained in the user
manuals.
u
This Guarantee shall not extend to
services performed by the authorised
dealer or the customer themselves (e.g.
installation, configuration, software
downloads). User manuals and any
software supplied on a separate data
medium shall be excluded from the
Guarantee.
u
The purchase receipt, together with the
date of purchase, shall be required as
evidence for invoking the Guarantee.
Claims under the Guarantee must be
submitted within two months of the
Guarantee default becoming evident.
u
Ownership of devices or components
replaced by and returned to Siemens shall
vest in Siemens.
Capacity 650
mAh
Standby time
Approx. 170 hours
(7 days)
Calling time
Approx. 13 hours
Charging time
approx. 6 hours
DECT standard
is supported
GAP standard
is supported
No. of channels
60 duplex channels
Radio frequency
range
1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission
power
10 mW,
average power per
channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base station
power supply
230 V ~/50 Hz
Environmental
conditions for
operation
+5 °C to +45 °C;
20 % to 75 % relative
humidity
Dialling mode
DTMF (tone dialling)/
DP (dial pulsing)