beautypg.com

Connecting the base station to the pabx, Dialling modes and flash time, Changing the dialling mode – Siemens Gigaset S450 User Manual

Page 44: Setting the flash time, Setting pauses, Changing pause after line seizure, Changing the pause after the recall key, Changing the dialling pause, Switching temporarily to tone dialling (dtmf)

background image

43

Connecting the base station to the PABX

Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / pabx.fm / 07.09.2005

Connecting the base station
to the PABX

The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS on
PABXs that do not support Calling Line
Identification.

Dialling modes and flash time

The current setting is indicated by

.

Changing the dialling mode

The following dialling modes can be
selected:

u

Tone dialling (DTMF),

u

Pulse dialling (DP).

v

¢

Ð

¢

Base

¢

Add. Features

¢

Dialling Mode

s

Select dialling mode (

= on)

and press

§OK§

.

a Press

and

hold (idle status).

Setting the flash time

v

¢

Ð

¢

Base

¢

Add. Features

¢

Recall

s

Select flash time (

= on)

and press

§OK§

.

a Press

and

hold (idle status).

Setting pauses

Changing pause after line seizure

You can change the length of pause that
is inserted between pressing the talk key

c and sending the number.
v

Open menu.

5 5 O 1 L

Press keys.

~

Enter digit for the pause
length (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press

§OK§

.

Changing the pause after the recall key

You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open

menu.

5 5 O 1 2

Press keys.

~

Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press

§OK§

.

Changing the dialling pause

v Open

menu.

5 5 O 1 1

Press keys.

~

Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press

§OK§

.

To insert a dialling pause: press

S for

2 seconds. A

P appears in the display.

Switching temporarily to
tone dialling (DTMF)

If your PABX still operates with dial
pulsing (DP), but you need tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
tone dialling for the call.
Requirement: You are conducting a call
or have already dialled an external
number.

§Options§

Open

menu.

Tone Dialing

Select and press

§OK§

.

Tone dialling is now activated
for this call only.